Call 08048704964 75% Response Rate

Send Email

Tile Adhesive

Our range of products include saint gobain weber tile adhesive classic, saint gobain weber tile adhesive premier, webeset white plus adhesive, gel based additive for cement slurry in tile fixing and saint gobain weber floor slurry bond tile adhesive.
Saint Gobain Weber Tile  Adhesive Classic
  • Saint Gobain Weber Tile  Adhesive Classic
  • Saint Gobain Weber Tile  Adhesive Classic

Saint Gobain Weber Tile Adhesive Classic

Product Price: Rs 390 / BagGet Best Price

Product Brochure

Product Details:
Packaging Size20 Kg
BrandSaint Gobain Weber
Usage/ApplicationTile on tile, Elevation adhesive
FormPowder
Pot Life2 hours 30 minutes
Initial Setting4 hrs
Grade StandardChemical
Packaging TypeBag
ColorGrey
Open Time30 min
Shelf Life1 Year
Country of OriginMade in India
Ready for use14 days
Set to light foot traffic220 min
Ready for grouting on floor24 hours
Adjust-ability time15 min
Mixing Ratio (powder to water)3 : 1 by volume
Mix Density1.80 to 1.85 gm/cc
Bulk Density1.45 to 1.50 gm/cc

Product description

  • Weberset classic is a high polymer modified thinset tile adhesive, specially formulated for fixing low porosity vitrified tiles on the floor in internal areas. The adhesive can be used for fixing ceramic tiles on wall and floor and is suitable for dry as well as wet areas for internal application. This is also suitable for tile-on-tile application for fixing vitrified tiles on pre-existing ceramic tile floors. Please refer tile/substrate sheet for more details.

 

Features & benefits

  • High Bond strength.
  • Free-flowing product makes it easier to mix and apply, easy-to-use.
  • Useful for bed thickness of 3-15* mm. May go upto 15 mm in a limited extent for wall & floor application.
  • Thixotropic formula - no sag, for the easy application on the wall.
  • Low VOC – For a healthy living.
  • For installation of vitrified tiles on the floor.
  • Suitable for internal use only.
  • Suitable for Tile-on-tile application of vitrified tiles on pre-existing ceramic tile floors.
  • Self-curing properties, which allows for no-hassle application, with minimum labor.
  • No hacking of the substrate required to achieve the required bonding.

 

Area of application

  • Refer Tile/Substrate sheet for details

 

Compliance / Standards

  • Specially formulated as per the requirements C (Cementitious) 1 (standard) T (Slip resistant and E(Extended open time) of ISO 45001 and EN 12004. Also complies to IS 15477:2004 (Type 1) and ANSI A118.1.

 

Limitations

  • Do not use for large format tiles.
  • Do not use in external areas, or areas exposed to direct sunlight.
  • Do not use for fixing vitrified tiles on walls.
  • Do not use for fixing stones.
  • Do not use on the wet screed. The surface must be fully cured.
  • Do not use for installing glass mosaic, glass tiles, or metal tiles. Use only weberset glass mosaic for fixing glass mosaics, and only weber epoxy adhesive for fixing glass and metal tiles.
  • Do not use for wooden flooring, for insulating and soundproofing panels.
  • Do not use on waterproofing coat - If waterproofing is required, use webertec SBR and webertec crete for the same. Refer to the respective datasheets for details.

 

Method of application

 

Preparing the substrate

  • Clean the substrate of oil stains and bond inhibiting compounds, dirt, dust, and laitance, if any, use high-pressure water jet or any other suitable method for cleaning.
  • Ensure that the substrate is flat, stable, well adhered, and has a normal absorption.
  • The substrate should be cured sufficiently to avoid the shrinkage cracks.
  • Correct the local undulation/damage on the substrate at least 48 hours before the application of weberset classic.
  • Saturate the surface thoroughly and remove excess water before the application of weberset classic
Get Best QuoteRequest Callback
Saint Gobain Weber Tile Adhesive Premier
  • Saint Gobain Weber Tile Adhesive Premier
  • Saint Gobain Weber Tile Adhesive Premier

Saint Gobain Weber Tile Adhesive Premier

Product Price: Rs 290 / BagGet Best Price

Product Brochure

Product Details:
ApplicationTile On Tile
BrandSaint Gobain
Packaging Size20 Kg
Packaging TypeBag
FormPowder
Grade StandardChemical
ColorGrey
Open Time10 mins
Shelf Life1 Year
Ready For Use14 days
Country of OriginMade in India
Bulk Density1.45 to 1.50 gm/cc
Mix Density1.80 to 1.85 gm/cc
Mixing Ratio (powder to water)3 : 1 by volume
Pot life2 hours 30 minutes
Adjust ability time15 mins
Ready for grouting on walls24 hours
Ready for grouting on floor24 hours
Set to light foot traffic220 mins

Product description

Weberset premier is a polymer modified, thinset tile adhesive for ceramic tiles, in internal areas. It is suitable for both vertical and horizontal application, over the cementitious substrate. It is supplied as a drymix mortar, to which water needs to be added before application.

 
Features & benefits

Can be used in internal areas, for floor as well as wall application.

Low VOC - for healthy living.

No hacking of the substrate required to achieve the required bonding.

Self-curing properties, which allows for no-hassle application with minimum labor.

The free-flowing product makes it easier to mix and apply.

No sag formula: provides for hassle-free application on vertical walls, without any slippage.

Very low shrinkage prevents debonding and gives longer life to tiles.

Useful for bed thickness of 3-12 mm. May go upto 15mm in a limited extent.

 
Area of application

Refer Tile/Substrate sheet for details

 
Compliance / Standards

Specially formulated as per the requirements C (Cementatious) 1 (standard) and T (Slip resistant) of ISO 13007 and EN 12004. Also complies to IS 15477:2004 (Type 1) and ANSI A118.1.

 
Limitations

Do not use for large format tiles.

Do not use for fixing vitrified tiles or stones.

Do not use on the wet screed. The surface must be fully cured.

Do not use for installing glass mosaic, glass tiles, or metal tiles. Use only weberset glass mosaic for fixing glass mosaics, and only weber epoxy adhesive for fixing glass and metal tiles.

Do not use for wooden flooring, for insulating and soundproofing panels.

Do not use on waterproofing coat - If waterproofing is required, use webertec SBR and webertec crete for the same.

Refer to the respective datasheets for details.

 
Method of application
 
Preparing the substrate

Clean the substrate of oil stains and bond inhibiting compounds, dirt, dust, and laitance, if any, use high-pressure water jet or any other suitable method for cleaning.

Ensure that the substrate is flat, stable, well adhered, and has a normal absorption.

The substrate should be cured sufficiently to avoid the shrinkage cracks.

Correct the local undulation/damage on the substrate at least 48 hours before the application of weberset classic.

Saturate the surface thoroughly and remove excess water before the application of weberset classic.

Get Best QuoteRequest Callback
Webeset White Plus Adhesive

Webeset White Plus Adhesive

Product Price: Rs 850 / BagGet Best Price

Minimum Order Quantity: 10 Bag

Product Brochure

Product Details:
BrandSaint Gobain Weber
GradePremium Grade
Usage/ApplicationMarble/ Granite & Tile Fixing
Packaging Size20 Kg
Country of OriginMade in India
Packing TypeBag
Tensile adhesion strength1.32 N/mm2
Tensile adhesion strength after water immersion1.25 N/mm2
Tensile adhesion strength after heat ageing1.24 N/mm2
Ready for use14 days
Set to light foot traffic220 mins
Ready for grouting on floor24 hours
Adjust-ability time20 - 25 min
Pot life2 hours
Mixing Ratio2.5 : 1 by volume (powder to water)
Bulk Density1.45 to 1.55 g/cc
ColorWhite
Physical statePowder
Shelf Life1 Year
Weberset plus-white is a ready to mix, highly polymer modified cementitious adhesive for vitrified, ceramic tile and natural stones of regular size on wall and floor with regular traffic. This product is suitable for fixing granite and other natural stones in window jambs and door frames due to its ability to with stand mechanical operations (which are carried out during fixing doors and windows). White colour adhesive adds to aesthetic look especially for light color stones. Features and benefits ??? Ready to mix, single component product. ??? Recommended for both internal & external surfaces for wall & floor in dry & wet areas. ??? Especially suited for fixing low porosity tiles and stones of regular size. ??? Suitable for fixing natural stones in window jambs and door entrances. ??? Highly polymer modified: Provides high structural adhesion, which allows to be used on a variety of substrates, for fixing a variety of tiles and stones. ??? Excellent adhesion properties, no slip is observed on vertical applications in tiles and natural stones. ??? Self-curing properties, which allows for hassle free application, with minimum labor. ??? No shrinkage, prevents debonding, and gives longer life to tiles and stones. ??? Low VOC for healthy living. ??? Prolonged and easy workability. ??? The tiled floor can be made available for foot traffic after 24 hours. ??? Can be used for new construction, as well as for renovation over existing floors/facades. ??? No hacking of substrate required to achieve the bonding. ??? Useful for bed thickness of 3-12 mm, may go upto 15 mm in limited extent. ??? Concrete screeds, renders and block work should be sufficiently cured to avoid shrinkage cracks. ??? Correct the local undulation/damage on the substrate at least 48 hours before the application of weberset plus white. ??? Saturate the surface well and remove excess water before application of the tile adhesive. Compliance / Standards ??? Specially formulated as per the requirements C (Cementitious) 2 (improved) & T (Slip resistant) of ISO 13007 and EN 12004. Also complies to IS 15477:2004 (Type 2) and ANSI A118.15. Limitations ??? Do not use on wet screed or plaster. Surface must be fully cured. ??? Use on gypsum plaster or boards, fiber cement boards, or other drywall partitions, strictly in accordance with the tile substrate recommendation table. ??? Can only be used on cementitious waterproofing. Do not use on epoxy or polyurethane water proofing. ??? Do not use for installing glass tiles or metal tiles. Use only weber bond poxy, for fixing glass and metal tiles. ??? Do not use on metal, rubber, plastics, vinyl, linoleum surface, painted substrates. Contact weber representative for recommendation. ??? Do not use on surfaces subjected to vibrations. For vibrations, use weberfix drywall for such areas.
Get Best QuoteRequest Callback
Gel Based Additive For Cement Slurry In Tile Fixing
  • Gel Based Additive For Cement Slurry In Tile Fixing
  • Gel Based Additive For Cement Slurry In Tile Fixing

Gel Based Additive For Cement Slurry In Tile Fixing

Product Price: Rs 180 / PackGet Best Price

Product Brochure

Product Details:
BrandSaint Gobain Weber
Usage/ApplicationTiling additive
Packaging Size300 gm
TypePolymer Bases
MaterialPowder
Packaging TypePouch
FormThick gel
Density1.05 gm/cc
Country of OriginMade in India
Mixing ratio for screed300 gm in every 50 liters of water
Mixing ratio for Slurry300 gm in every 20 liter of water
Tensile adhesion strength0.55 Mpa
Ready for grouting7 days
Compressive strength1 Mpa
Product Description

Weberfloor cementonic is a gel based high performance additive, for traditional tile laying method, using a cement slurry over freshly laid screed. It is to be mixed in water which is to be used for making the cement slurry. In addition, weberfloor cementonic can also be used to enhance the strength of the screed as well. Use of weberfloor cementonic greatly reduces the total cost of application, by vastly increasing the coverage of cement slurry, and decreasing the curing time.

Features & Benefits
  • Easy to use – gel type material, in oeasy to handle pouches allows easy usage, and also prevents wastage.
  • Multiple use – can be used to improve performance of cement in any use. Specially use for cement bedding (screed) and cement slurry for laying tiles.
  • In depth penetration of cement slurry, modified with weberfloor cementonic, provides strength to overall system.
  • Imparts self curing properties to screed and slurry.
  • Increases cohesive strength of the cement bedding (Screed), and also increases the bonding between the tile and screed.
  • Greatly increases pot life, ensuring higher speed of tiling and no wastage.
  • Imparts adjustability time for tiling done in traditional method.

Area of Application
  • For making cement screed bed for tiling.
  • For laying tiles on to freshly laid screed using traditional method of fixing.

Limitations
  • Not to be used on pre-set screed.
  • Not to be used on wooden, metal or glass substrates.
  • Only to be used for floor application.
  • Additives for cement slurry are not a substitute for tile adhesives and is to be used only as a strength enhancer where traditional method is being used.
  • If waterproofing required to be done, should be done using weber waterseal 321 prior to applying the screed. Use twice the quantity of weberfloor cementonic for best results.
  • For best results and long lasting tiling, always use weber tile adhesives, over fully cured cement bed, screed or other substrates.

Method of Application
  • For Cement bedding (screed)
  • Surface Preparation
  • Clean the substrate of oil stains and bond inhibiting compounds, dirt, dust and laitance, if any, using high pressure water jet or any other suitable method.
  • Make sure the slab is sufficiently cured, so as to prevent any shrinkage cracks.
  • Saturate the surface well and remove excess water before starting the screeding activity.

Mixing
  • Add 300 g of weberfloor cementonic in 50 liters of water.
  • Mix thoroughly, till there are no paste lumps left.
  • Allow the mix to stand for two minutes before using.
  • Mix cement and sand in the ratio 1:6, or any other ratio as per industry best practices and create a loose mortar with the weberfloor cementonic fortified water, prepared earlier.

Applying
  • Apply a cost of fortified cement slurry either made using weberfloor slurrybond, or using weberfloor cementonic, over the base slab.
  • While the coat is still wet, evenly spread the mortar over the area to be covered by cement bedding (screed).
  • Compact the mortar well, while levelling the bed.
  • Proceed with tile laying if using the wet-on-wet method or allow curing for atleast 7 days, before fixing tiles, using thinset tile adhesives.
Get Best QuoteRequest Callback
Saint Gobain Weber Floor Slurry Bond Tile Adhesive

Saint Gobain Weber Floor Slurry Bond Tile Adhesive

Product Price: Rs 950 / BagGet Best Price

Product Brochure

Product Details:
BrandSaint Gobain Weber
Usage/ApplicationCement slurry alternative for better adhesion
FormPowder
Packaging Size20 Kg
Coverage Area200 sft
TypesVitrified
Packaging Type20 Kg
ColorGrey
Open Time60 mins
Country of OriginMade in India
Mix Density1.4-1.5 gm/cc
Application thicknessAs slurry : 1-3 mm, As thin set adhesive : 2-10 mm
Pot life5 hrs
Adjust-ability time60 mins
Ready for grouting on floor24 hours
Set to light foot traffic4 days
Ready for use7 days
Temperature Resistance-5 to 100 deg C
Product Description
  • Weberfloor Slurrybond is a highly polymer modified, cementitious adhesive, that can be used in slurry form, on wet screed, for wet-on-wet fixing of tiles and stones, as well as an adhesive paste for fixing tiles and stones on floor and wall. In slurry form, it replaces the cement slurry which has been traditionally used for fixing floor tiles/stones. It also provides additional strength to the screed itself, and increase the tiling speed.

Features & Benefits
  • 4 times more coverage than Cement slurry
  • Free flowing - no need for troweling
  • Shrink resistant
  • Provides additional strength to screed, as polymers travel to the screed while applied in wet-on-wet condition
  • Easy to use
  • Highly polymer modified for high strength bonding.
  • Dual use : Can be used a slurry adhesive, or as a thinset tile adhesive.
  • Very high pot life ensures higher speed of tiling, and no wastage.
  • Water needs to be continuously added to cement slurry, which reduces strength. No such issues with Weberfloor slurrybond.
  • High Adjustability time. Cement slurry does not offer an adjustment time, and if the tile needs to be adjusted, the slurry needs to be replace. Further reduces wastage.

Area of application

As Slurry
  • One wet / freshly laid screed, for fixing most tiles, mosaics and stones. For detail, refer tile/substrate sheet.

As Adhesive
  • Refer Tile/Substrate sheet. 

Applying
  • Pour the mixture of Weberfloor slurrybond and water, as described above, over fresh screed, and spread the slurry to a uniform thickness of 1 to 2mm.
  • Carefully place the tile onto wet, sticky slurry.
  • Use spacers, to leave enough space betwee tiles, as per the tile manufacturer recommendations.
  • Stroke the tiles using a rubber mallet, to level the tiles, and ensure the tile is perfectly imbedded in the soft screed.
  • It is good practice to lift an occasional tile after fixing, to verify that the required contact is being achieved.
  • If the slurry is skinned over, remove the slurry and replace with fresh slurry.
  • If necessary, tiles should be adjusted within 60 minutes of installation.
  • Carefully clean off any excess adhesive from the tiles and joints with a damp sponge or cloth before it sets.
  • Leave for at least 24 hours before grouting. 

Note to Specifier
  • Ensure screeding is done as per IS 1443 or as per standard construction practices
  • Use Primer 401, corner treatment with Stickon tape and two component Waterseal 321 for
  • comprehensive waterproofing, before screeding, where waterproofing is required.
  • To get excellent stain resistence on stone, use hydrophobic and oliophobic impregnator Weber
  • Stoneseal.
  • To match joint with the colour of tile/stone, use Weberjoint poxy along with Weberjoint poxyfill, available in more than 40 colours.
  • To get invisible joints between stones, fill with specially formulated Weber Pearl Armor™
  • speciality grout.
  • To get highly aesthetic appeal, fill joints with Weber Knight ArmorTM speciality grout. 

Applicable Standards
  • ANSI A118.4 and ISO 13007 - as thinset adhesive.

Limitations

As Slurry
  • Not to be used on preset screed
  • Not to be used on wooden, metal or glass substrates
  • Only to be used for floor application

As Thinset Adhesive
  • Can be used for internal as well as external, floor as well as wall application, in accordance with the Tile/substrate sheet.
Get Best QuoteRequest Callback

EXPLORE MORE CATEGORIES

Looking For "Tile Adhesive"?
Thank youYour Enquiry has been sent successfully.
© Varun Ceramics & Sanitary. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.