Call 08048704964 77% Response Rate

Send Email

Epoxy Grout

We are a leading Wholesale Distributor of saint gobain weber epoxy grout night armour, weber shine armour premix glitter resin kit, weberepox easy 2 component epoxy grout and saint gobain weber joint epoxy fill from Chennai, India.
Saint Gobain Weber Epoxy Grout Night Armour
  • Saint Gobain Weber Epoxy Grout Night Armour
  • Saint Gobain Weber Epoxy Grout Night Armour

Saint Gobain Weber Epoxy Grout Night Armour

Product Price: Rs 5,500 / BottleGet Best Price

Product Brochure

Product Details:
BrandSaint Gobain Weber
Usage/ApplicationConstruction
Yield60-100sft
Packaging Size1 Kg
ColorGreen And Blue
Packaging TypeBucket
Mixing RatioPart A: Part B - 11.5 : 1 by weight/ Part A: Part B - 7 : 1 by volume
Pot Life Of Mix45 min @ 27 deg C
Country of OriginMade in India
Full Cure7 days
Setting for light foot traffic24 Hours
Adjust-ability time for adhesive30 min
Open time for adhesive20 min
Application temperature range10 deg C to 35 deg C
Mixed Density1.60 gm/cc
Features and benefits
  • It can be used as green building products since it utilizes the natural energy to provide luminance in dark for pedestrian movement with a high aesthetic appeal.
  • The non-sag formula for wall & floor applications.
  • High bonding strength with tiles and stones.
  • Joints with weber knight armor are resistant to most of the commercial tile & stone cleaners.
  • Non-absorbent i.e. water-resistant joints prevent the growth of fungus and bacteria.
  • Two components, ready to mix, ensure consistent quality of grouts.
  • Very low shrinkage and high resistance to cracks.
  • Easy to mix, creamy consistency, faster in application and ease in cleaning to get smooth & decorative finish.
  • Excellent chemical & stain resistance properties.
  • High mechanical strength allows usage in high foot traffic areas, open parking & vehicle movement.
  • It can be applied in between the tile & stone under submerged condition due to its water-resistance properties.
  • It can also be used as adhesive for fixing transparent glass tiles & blocks.
  • Minimum exposure of light intensity at joints required from 300-1000 lux to get visible luminance for more than 5–8 hours and luminance been tested as per international standard.
  • High translucence with coated pigment increases the chromatic effect resulting in the highly aesthetic and decorative finish.

Things to consider
  • Minimum joint width of 1 mm.
  • Maximum joint width of 7 mm in vertical and 14 mm in horizontal.
  • Not to be used in industrial aggressive chemical prone areas and the areas which are subjected to aggressive cleaning with pressure or steam cleaning.
  • At least 7 days after grouting for acid cleaning & submerged conditions.
  • The luminance performance would be affected if the joints are not exposed to daylight or household light.
  • The joints look white during day time irrespective of the colour of the tile.

Available Size
  • 1 Kg
  • 5 Kg
Get Best QuoteRequest Callback
Weber Shine Armour Premix Glitter Resin Kit
  • Weber Shine Armour Premix Glitter Resin Kit
  • Weber Shine Armour Premix Glitter Resin Kit
  • Weber Shine Armour Premix Glitter Resin Kit
  • Weber Shine Armour Premix Glitter Resin Kit
  • Weber Shine Armour Premix Glitter Resin Kit
  • Weber Shine Armour Premix Glitter Resin Kit

Weber Shine Armour Premix Glitter Resin Kit

Product Price: Rs 1,800 / KgGet Best Price

Product Brochure

Product Details:
Form2 Component Epoxy Grout
BrandSaint Gobain Weber
Packaging Size1 Kg
TypeEpoxy Grout
Packaging TypeBucket
ColorGold, Silver & Copper
Country of OriginMade in India
Full Cure7 days
Setting for light foot traffic24 Hours
Adjust-ability time for adhesive30 min
Open time for adhesive20 min
Application temperature range10 deg C to 35 deg C
Pot Life Of Mix45 min @ 27 deg C
Mixed Density1.60 gm/cc
Mixing RatioPart A: Part B - 11.5 : 1 by weight/ Part A: Part B - 8 : 1 by volume
Features and benefits
  • Glitter component is premixed to avoid mixing at the site. This results in consistent, uniform & highly aesthetically finished joints.
  • The glittering effect is higher due to reflective filler & transparent resin enhances decorative and durable joints.
  • Easy to mix with a creamy consistency which helps in faster application and ease in cleaning.
  • Available in attractive & decorative colours.
  • High sag resistance formula and thixotropic. Can be used for both floor & wall applications.
  • Excellent stain & chemical resistance properties.
  • Very low in shrinkage and high resistance to cracks.
  • Non-absorbent and water-resistant joints prevent the growth of bacteria and fungus.

Things to consider
  • Minimum joint width of 1 mm.
  • Maximum joint width of 7 mm in vertical and 14mm in horizontal.
  • Do not use the grouts in industrial aggressive chemical prone areas and the areas which are subjected to aggressive cleaning with pressure or steam cleaning.
  • At least for 7 days after grouting for acid cleaning & submerged conditions.
Get Best QuoteRequest Callback
Weberepox Easy 2 Component Epoxy Grout
  • Weberepox Easy 2 Component Epoxy Grout
  • Weberepox Easy 2 Component Epoxy Grout
  • Weberepox Easy 2 Component Epoxy Grout
  • Weberepox Easy 2 Component Epoxy Grout
  • Weberepox Easy 2 Component Epoxy Grout
  • Weberepox Easy 2 Component Epoxy Grout

Weberepox Easy 2 Component Epoxy Grout

Product Price: Rs 3,200 / BucketGet Best Price

Minimum Order Quantity: 1 Bucket

Product Brochure

Product Details:
BrandSaint Gobain
Usage/ApplicationConstruction
Packaging Size5 Kg
ColorOther
Packaging TypeBucket
Compressive Strength>24.2 MPa
Pot Life Of Mix@ 25 deg C > 80 min
Shrinkage<0.25%
Country of OriginMade in India
Temperature range0 to 80 deg c
Full cure7 days
Shelf Life24 Months
Thermal shock resistance>3.5 MPa
Tensile strength>6.9 MPa
Bond strength to quarry tile>6.9 MPa
Weberepox Easy is a two-component, easy to use, epoxy-based tile adhesive and grout. It is suitable for all types of tiles and stones on the floor and wall. It is especially recommended for hygiene sensitive areas and also areas which require sterile conditions.

When components of weberepox easy are mixed, it forms a smooth, creamy & thixotropic paste, which makes it easy to mix, easy to apply, easy to clean, and easy to maintain. At the same time, it also provides high mechanical and chemical resistance properties.

Features & Benefits
  • For grout joints between 2 mm - 12 mm.
  • Easy to mix, creamy consistency high productivity grout.
  • Can be applied on wall and floor.
  • Highly thixotropic - non - sag formula can be used as both grout and adhesive on floor & wall.
  • Easy to apply
  • Early flexural properties
  • High resistance to abrasion
  • High Compressive strength
  • Low water absorption results in watertight joints
  • Resistance to stain & chemicals.
  • Hygienic in service & would not allow bacterial growth
  • Low VOC - Over curing full reaction takes place.
  • Available in 12 widely used colors.

Conformity To Standards
  • RG - as per ISO 13007 - 3
  • R2T - as per ISO 13007
  • ANSI A118.3 - chemical resistant, water cleanable, tile setting & grouting epoxy.
  • US FDA in accordence with 21 CFR 175.300 of application section and the literature of the tile/stone manufacturer taking suitable precaution. It is always advisable to test a small sample area before grouting the entire area.

Method Of Application

Surface preparation
  • The tiles/stones should be firmly set & the adhesive or mortar should be completely dry.
  • Remove the spacers should before grouting. Grout joints must be clean and free of standing water,
  • dirt, dust & foreign matter.
  • Remove the excess of adhesive or mortar from the joint area.
  • Do not clean the tiles/stones with acid cleaners. All joints to be clean by washing with water/detergent.
  • Any water or moisture present during grouting will reduce the performance of the grout.
  • Ensure the joints are completely dry before grouting.

Mixing
  • Ensure proper use of personal protective equipnent (PPE) before mixing.
  • Take 4 parts Resin (component A), 1 part Hardener (component B) i.e., (4:1 by weight and 3.75:1 by volume)
  • Mix the components thoroughly for 2-3 minutes minutes to get a homogeneous paste and consistent color.
  • Avoid proloonged mixing as it traps air and shortens pot life.
  • The workable mixed grout can be used for upto 80 minutes at 250C.
  • Wash tools immediately with water before the  epoxy hardens. It is very difficult to remove  after it has hardened.
  • In case of mixing with a mechanical mixer, recommended a slow 100 rpm mechanical mixer.
  • No water to be added in the mix.
Get Best QuoteRequest Callback
Saint Gobain Weber Joint Epoxy Fill
  • Saint Gobain Weber Joint Epoxy Fill
  • Saint Gobain Weber Joint Epoxy Fill

Saint Gobain Weber Joint Epoxy Fill

Product Price: Rs 3,300 / SetGet Best Price

Product Brochure

Product Details:
BrandSaint Gobain
Usage/ApplicationConstruction
Packaging Size5.5 Kg
ColorGray
Packaging TypeBucket
Pot Life Of Mix45 mins
Shrinkage<0.25%
Country of OriginMade in India
Shelf Life2 Year
Wet Density1.72 gm/cc
Application Temperature Range0 deg C to 80 deg C
Full Cure7 days
Water clean-ability80 min
Initial setting time>120 min
Service setting time<7 days
Tensile strength> 7 Mpa
Thermal shock> 3.5 Mpa

Weber.joint epoxy can be mixed with weber.joint poxyfill to form an epoxy system. Weber epoxy system is a 100% solid, reaction resin based, impervious epoxy grout suitable for applications on all types of tiles and stones. When mixed as per instructions, it forms to a smooth, creamy easy-to-apply consistency which on final setting delivers high mechanical strength, impact and abrasion resistance. It is also recommended for hygiene sensitive areas requiring sterile conditions, stain and chemical resistance. Weber epoxy system can be used as a heavy duty grout available in a wide spectrum of attractive colours. It is easily water cleanable as per ISO 13007, Part 4 & ANSI 118.3.

 

Features & Benefits

  • Easy-to-use with superior workability & water clean ability.
  • Non sagging properties for ease of application in walls & floors.
  • Resistance to stains & chemicals.
  • Very low water absorption.
  • Available in a wide spectrum of over 40 attractive colours.
  • Early flexural properties.
  • For grout joints between 2mm-14mm.
  • High resistance to abrasion.
  • High Compressive strength.
  • Very low shrinkage exceeds international standards.
  • Hygienic in service & would not support bacterial growth.
  • Low VOC-Over curing full reaction takes place.
  • Low water absorption and resistance to a wide degree of temperature variation ensures it can be used for wet areas, swimming pools, spas, jacuzzis, bathrooms, public toilets and showers.
  • Low abrasion or high abrasion resistance makes it suitable for usage in heavy traffic areas like subway stations, shopping malls & airport terminal buildings.

 

Limitations

  • Suitable for joint widths between 2mm & 14mm.
  • Epoxy grout applications should not be done in excessive heat. After full curing weber epoxy would resist temperatures between 0 deg C-80 deg C.
  • When weber epoxy grouts is use on exterior installations, color variations may occur over time especially with lighter shades due to ultra violet rays or environmental contaminants.
  • Please ensure compatibility of the tiles/ stones with the pigmented filler mixed with the epoxy kit. Please refer to the methodology of application section and the literature of the tile/stone manufacturer taking suitable precaution. It is always advisable to test a small sample area before grouting the entire area.

Product Application
  • Before the application process ensure proper PPE. Only grout a small area at a time and ensure that the joints are firmly filled and free of voids.
  • The application is done using a rubber float or an appropriate tool.
  • The float is used to force the grout into the joints in a continuous manner, leaving it flush with the tile edge.
  • Wipe off any excess material immediately with a sponge or an appropriate tool. Use a damp sponge to clean the tiled surface. Use the sponge in circular motion to get optimum results.
  • It should be ensured that minimum amount of water is required in cleaning which otherwise impair the final chemical resistance.
  • The area should be cordoned to prevent any accidental damage to the grout.
  • For vertical surfaces a non-abrasive cloth or pad can be used to loosen any film and removing it without remove the epoxy from the joints. Our current scrubber is of abrasive type.
  • For small touch ups during grout joint imperfections, a suitable sharp tool can be used to do it.
  • It is recommended that for horizontal surfaces the final cleaning and touch ups should be done within 30 min from the application & for vertical surfaces it is done within 20 min from application.

Available Size
  • 1.1 Kg
  • 5.5 Kg
  • 22 Kg
Get Best QuoteRequest Callback

EXPLORE MORE CATEGORIES

Looking For "Epoxy Grout"?
Thank youYour Enquiry has been sent successfully.
© Varun Ceramics & Sanitary. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.